Bitumen Agitator Tank

CXTCM has been over 20 years since we started to design Bitumen Agitator Tank in the early 1990s. Because of different storage capacities, locations of tanks and types of bitumen stored, flexible designs will be provided to meet different requirements. Unit tank capacity is 30T, 40T, 50T, 80T. With thermal oil heating system, the facility has advantage of quick-heating, temperature easy control, automatically operation, stirring evenly. It’s friendly for storing the special bitumen, like emulsion bitumen, modified bitumen. It can be used as production tank to produce emulsion bitumen directly in some area.

In the whole Bitumen heating System, a variety of bitumen can be stored in different tank, and the tanks are connected by bitumen pipelines, valves are controlled and switched, and the bitumen can be pumped from one tank to another when there is a problem with one tank.

Bitumen Agitator Tank Parameter (Specification)

Reserve the right to change the parameters without prior notice.

Bitumen Agitator Tank Details

1- Tank fittings

One agitator is installed on the top for the vertical tank; Two or three agitators are installed on the top for the horizontal tank according to different requirements. Both of them can be used for mixing special bitumen evenly prevent from isolating of additives. Optional ladders access to the top, with handrails around on the top to ensure safe operation on the top.

2- Pipelines, valves, pumps and other fittings

Layout of pipelines, valves and pumps is designed tidily. Tanks are fixed with thermometers and high level indicator to control bitumen temperature well and avoid overflow.

3- Insulation

Pipelines are wrapped by rock wool and covered by galvanized sheet or aluminum sheet to increase thermal retention and improve energy saving. Some pipelines insulation can be done in factory and connected easily with flanges at jobsite to shorten installation period.